Description

Each AN20MA-2 board has two 1/8” (3mm) diameter mounting holes, which allows it to be easily mounted on copper or Nylon standoffs. Note that the two mounting holes are spaced 4.200 inches apart, which is identical to that found on the FMD and F-series PLCs. This means that the AN20MA-2 can be mounted readily on a DIN-Rail using 1/2 pack of DIN-KIT-2B or 1/3 pack of DIN-KIT-3B.

*Works on FMD and Fx PLCs*

Item

Quantity

Qty

Specification

Physical
Dimensions4.7"(L) x 1.5"(W) x 0.7"(H)
119.5mm (L) x 39mm (W) x 17mm (H)
Weight 0.27 Ib (122 grams)
ConnectionDB15 Terminal (direct or via DB15 Cable)

Environment
Operating Temperature -20 to +85 deg C
(-4 to +185 deg F)
Operating Humidity10% to 90% Rel. Humidity, non condensing
Vibration ResistanceIEC 68-2-6/1980 Vibration 1.6mm
  • 25Hz to 100Hz
  • Amplitude = +1
  • Acceleration = + 4.0g
Electrical Noise ResistanceIEC801-4 (Fast transient)
  • 2KV to power supply
  • 50 microsecond pulse width
  • 1 min. 1KV to I/O by capacitive coupling
  • 0 microsecond pulse width

Document Name

Document Type

Download
AN20MA-2 Installation Guide GuideView PDF 

Product

Description

Compatible

Compatible

Super PLCs (Fx)
Fx242424 input, 24 output PLC with Ethernet and Floating Point
Fx1616-BA16 input, 16 output (12 Relays) PLC with Ethernet and Floating Point
EZWire161616 input, 16 output (field-wiring terminals) PLC with Ethernet and Floating Point

Super PLCs (FMD)
FMD1616-1016 input, 16 output PLC with Ethernet
FMD88-108 input, 8 output PLC with Ethernet

Super PLCs (Nano-10
Nano-104 input, 4 output (2 Relays) PLC with Ethernet

Classic PLCs (E-Series)
E10-npn+6 input, 4 output PLC - ladder logic only
E10-rly+6 input, 4 output (relay) PLC - ladder logic only

Mounting
DIN-KIT-1BDin Rail Mounting Kit - Small
DIN-KIT-2BDin Rail Mounting Kit - Medium  * Uses 1/2 DIN-KIT-2B *
DIN-KIT-3BDin Rail Mounting Kit - Large  * Uses 1/3 DIN-KIT-3B *