I have a T100MD 888 and MD-HMI.
My program runs under simulation mode and key inputs and led's outputs works.
However when I down load the program to the plc none of the keys or led?s work on MD-HMI?
Further if I go to online monitoring and activate the keys it works. Did I miss something?
I have assign inputs 10=key 0 ~19=key 9, 20=key delete, 21= key enter, 22=F1 ~25=F4.
Outputs 10=led 1~ 13=led 4, 14=F1 led~ 17=F4 led.
Kindly advise.