Author Topic: H-Series Output Source Clarification  (Read 12882 times)

abello87

  • Newbie
  • Posts: 7
  • I'm a llama!
    • View Profile
H-Series Output Source Clarification
« on: September 06, 2010, 10:10:14 PM »
Hello All,

I'm new to PLC control and building my first machine using a PLC. I just purchased a T28H-Relay and while looking at the manual I see it says "Voltage Source 0-250V (DC/AC)." Does that mean for example I can have a solenoid output operate at 12VDC and another operate at 30VDC?

Thanks

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re:H-Series Output Source Clarification
« Reply #1 on: September 07, 2010, 12:09:10 PM »
yes, the 12 relays on the T28H-Relay are all independent dry contacts so they can be used to control different power sources.
Email: support@triplc.com
Tel: 1-877-TRI-PLCS

abello87

  • Newbie
  • Posts: 7
  • I'm a llama!
    • View Profile
Re:H-Series Output Source Clarification
« Reply #2 on: September 07, 2010, 07:48:10 PM »
Thanks. Does this mean I need to provide an external 12V Power source and an external 30V power source for these outputs?

« Last Edit: September 07, 2010, 09:00:49 PM by abello87 »

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re:H-Series Output Source Clarification
« Reply #3 on: September 08, 2010, 07:08:36 AM »
You need to provide 12V power source for the PLC. Any other voltages has to be provided for your load to pass through the relays contacts. These other voltages are isolated from the PLC.
Email: support@triplc.com
Tel: 1-877-TRI-PLCS