T100MD and E10+

[GulliB58]

Could someone please help me with some lader programming.
I have 3 E10+ and one TM100MD on a RS485 net.
Do someone have a lader program that read the inputs of the E10+ (on/off) and trigger one rely of the TM100MD ? (one rely for one input) Thanks for any help, an example would be great

[support]

There are application notes for using E10 PLCs and T100MD PLCs on our website at the following link:

http://www.tri-plc.com/appnotes/AppnoteMain.htm

Here is a direct link to a basic application note that shows how to use E10 PLCs as remote I/O slaves on an RS485 network. This link downloads a .zip file that includes the application note, some reference documents, and a sample program to run on the T100MD888+ PLC:

http://www.tri-plc.com/appnotes/Appnote2.htm#ans21