Author Topic: Beginner needs help  (Read 12935 times)

LogicRetrofitters

  • Newbie
  • Posts: 6
  • Ammonia Refrigeration
    • View Profile
    • Logic Retrofitters
Beginner needs help
« on: May 20, 2007, 06:08:54 PM »
I am designing my first Tri and can't quite figure out which inputs are digital and which are analog. Same for outputs. The T100MD+ User's Manual doesn't really help me with where to hook up my inputs on my 888+. Thanks for your help.
Amateurs practice until they get it right. Professionals practice until they can't get it wrong.

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re:Beginner needs help
« Reply #1 on: May 20, 2007, 07:21:08 PM »
You should refer to the T100MD888+ Installation guide (8 page white color booklet) which shows you where the digital inputs, outputs and analog I/Os are.
Email: support@triplc.com
Tel: 1-877-TRI-PLCS

LogicRetrofitters

  • Newbie
  • Posts: 6
  • Ammonia Refrigeration
    • View Profile
    • Logic Retrofitters
Re:Beginner needs help
« Reply #2 on: May 22, 2007, 07:55:56 PM »
AHA! The plot thickens. I got two green books. No white one for the 888+ like the one with the E-10 I ordered at the same time. I will look around to see if that can be downloaded.

Thanks mucho!!!
Ben
Amateurs practice until they get it right. Professionals practice until they can't get it wrong.

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re:Beginner needs help
« Reply #3 on: May 22, 2007, 08:28:20 PM »
The white installation guide is normally enclosed inside the PLC box (not in the starter kit pack). We apologize if it is not in the box but the PDF file can be downloaded from:

  http://www.tri-plc.com/t100md888.htm

Just click on the "installation guide" link and it will be downloaded.
Did you get a blue color "T100MD+ User Manual"? This one can also be downloaded from the above link.
Email: support@triplc.com
Tel: 1-877-TRI-PLCS

LogicRetrofitters

  • Newbie
  • Posts: 6
  • Ammonia Refrigeration
    • View Profile
    • Logic Retrofitters
Re:Beginner needs help
« Reply #4 on: May 30, 2007, 04:56:33 PM »
Got it! Thanks mucho!

Ben
Amateurs practice until they get it right. Professionals practice until they can't get it wrong.