SAVE_EEP# f, n
Purpose Save the 32-bit IEEE single precision number f that represent the floating-point data x# to the EEPROM/FRAM address n.,
Examples SAVE_EEP# FP[20], 100
Comments: Float data contained in variable FP[20] will be saved to the EEPROM address 100

Note that LOAD_EEP# and SAVE_EEP# uses the identical EEPROM space as LOAD_EEP32 and SAVE_EEP32.

For more details please refer to LOAD_EEPXXX commands in the TL6 Programmer’s Reference manual. Thus, if you are using the EEPROM space to save both integer and float data, you must manage the memory space properly to ensure that this command does not overwrite the memory space reserved for saving 8, 16 or 32-bit integers..

See Also LOAD_EEP# , SAVE_EEP32, LOAD_EEP32

backbutton.gif (507 bytes)  Basic to TBASIC Reference Manual