Author Topic: settimer sv  (Read 7009 times)

artkraft

  • Newbie
  • Posts: 22
  • I'm a llama!
    • View Profile
settimer sv
« on: November 23, 2018, 07:29:17 PM »
I have been using SETCTRSV 6, DM[100] and entering a value via touch screen.
Will SETTIMERSV 7, DM[101] work as well.

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3140
    • View Profile
    • Internet Programmable PLCs
Re:settimer sv
« Reply #1 on: November 24, 2018, 06:28:12 PM »
Yes both of these are TBASIC codes to set the timer and counters preset values.

Note that for Fx class PLCs the changes are immediately non-voilatile since they  are stored to the FRAM memory.

For FMD and Nano-10 you will need to run the SETSYSTEM command to store these new values to the flash memory. So it is not recommended to make changes to these set values very frequently as it will affect the SCAN time due to the need to erase a bank of flash memory and then backup the whole bank to the flash memory.

One other way to start a timer or counter in TBASIC is to assign their PV to a value.

E.g.
TIMERPV[ tim1 ] = DM[100]
CLRIO  tim1   ' Timer #1 label name is tim1.
Email: support@triplc.com
Tel: 1-877-TRI-PLCS

luciham20

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: settimer sv
« Reply #2 on: May 25, 2022, 08:09:54 AM »
You've come to the correct place if you're new to Playing Mobile Legends on PC by Games MEA. We're here to talk about the game's important elements and how to play it on a PC without using an emulator. Mobile Legends: Bang Bang is, of course, a mobile game. However, if you're a true game-changer, then playing it on PC is the ideal choice. So, what exactly are you waiting for? Let's go further into this information! In comparison to the PC versions of DOTA or LOL, the gameplay of Mobile Legends:Bang Bang is easy. One of the most important things you should know is your job, as well as the equipment, talents, and powers of each hero.

Also download Pokemon Unite here!

priscilavan06

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: settimer sv
« Reply #3 on: June 27, 2022, 08:04:13 AM »
Thanks for the information on this. I hope it works on my end. Electrical Regina