Author Topic: Printout enhancement  (Read 5739 times)

cch1955

  • Full Member
  • Posts: 198
  • Automated Machine Systems Designer
    • View Profile
Printout enhancement
« on: July 29, 2016, 03:48:01 PM »
Currently if I have a program loaded on your development PC and want to print out the Custom Functions the only selection is to print all of them out between X and Y.

During development you may have numerous custom functions that get made to test etc which you don't want printed out and are not in the active program.

If the print command had an option to print only the Custom Functions that are used in the loaded active program, it would be very helpful.

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3170
    • View Profile
    • Internet Programmable PLCs
Re:Printout enhancement
« Reply #1 on: August 01, 2016, 09:09:40 AM »
Thank you for your feedback. Your suggestions will be sent to the software development team for consideration.

Note that you can export the custom functions to a text file and you can the edit the text file to retain only custom function of interest before you send them to paper printout. That may be a short term fix for the moment.
Email: support@triplc.com
Tel: 1-877-TRI-PLCS

cch1955

  • Full Member
  • Posts: 198
  • Automated Machine Systems Designer
    • View Profile
Re:Printout enhancement
« Reply #2 on: August 08, 2016, 08:39:05 AM »
I have tried your work around, but often the formatting of the code gets lost making it a mess. I do this when I have to , but hate all the messing around it requires.