Author Topic: Upload Password Protection  (Read 6656 times)

ctsalesinc

  • Newbie
  • Posts: 1
  • I love YaBB 1G - SP1!
    • View Profile
Upload Password Protection
« on: January 02, 2004, 05:26:10 PM »
I have a T40H-Relay PLC and I'm using WinTRiLOGI v3.5.  I wish to protect my code from unauthorized uploading.  The manual shows a menu item called "Target Access" which allows setting of a password.  This menu item does not appear.  Can you offer assitance?
« Last Edit: December 31, 1969, 04:00:00 PM by 1076562000 »

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3170
    • View Profile
    • Internet Programmable PLCs
Re: Upload Password Protection
« Reply #1 on: January 03, 2004, 08:33:50 PM »
The password protection feature is no longer supported on the WinTRiLOGI 3.5 because WinTRiLOGI does not allow uploading of code from the PLC in any case.

In order to utilize the transfer password protection feature you will have to run the DOS TRiLOGI verison 3.3. The DOS TRiLOGI is available on your WinTRiLOGI CD-ROM and you can install it in your PC if your PC supports pure DOS mode. Note that DOS TRiLOGI cannot be used under Windows 2000, NT or XP.
« Last Edit: December 31, 1969, 04:00:00 PM by 1076562000 »
Email: support@triplc.com
Tel: 1-877-TRI-PLCS