Author Topic: Running program from PC  (Read 1100 times)

abello87

  • Newbie
  • Posts: 7
  • I'm a llama!
    • View Profile
Running program from PC
« on: January 03, 2012, 04:31:24 PM »
I've seen an example project run from the PC using the simulator run setup to actuate various outputs for testing/"show-n-tell". At the time I was just being introduced to PLCs so I didn't bother to ask how they set it up.

Is that possible with an H-series PLC with the wintrilogi program (v3.5)?

Thanks much,

Abello

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3118
    • View Profile
    • Internet Programmable PLCs
Re:Running program from PC
« Reply #1 on: January 03, 2012, 08:28:08 PM »
If you put the WinTRiLOGI software into online monitoring mode then it will show the status of all the I/Os and you can also force set an output (if it weren't controlled by the logic) by clicking on it. Right mouse click toggles the output whereas left mouse click turns on an output when left button is press and turn off the output when the left button is released.
Email: support@triplc.com
Tel: 1-877-TRI-PLCS

abello87

  • Newbie
  • Posts: 7
  • I'm a llama!
    • View Profile
Re:Running program from PC
« Reply #2 on: January 03, 2012, 11:26:54 PM »
Excellent.

Thank you very much.

Abello