« previous next »
Pages: [1]

Author Topic: Where is normally closed output symbol?  (Read 11969 times)

bl

  • Newbie
  • Posts: 18
  • I'm a llama!
    • View Profile
Where is normally closed output symbol?
« on: February 07, 2009, 07:49:58 PM »
Does anybody know where is the symbol for normally closed output?
I use v.6.22 of Trilogi.
Logged

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re:Where is normally closed output symbol?
« Reply #1 on: February 08, 2009, 08:39:32 AM »
There is no normally closed output in TRiLOGI. You can invert it using an internal relay.
Logged
Email: support@triplc.com
Tel: 1-877-TRI-PLCS

bl

  • Newbie
  • Posts: 18
  • I'm a llama!
    • View Profile
Re:Where is normally closed output symbol?
« Reply #2 on: February 08, 2009, 10:31:31 AM »
Where is this internal relay? I couldn't find anything.
Personally I don't mind Trilogi but why it is so much complicated compared to another PLC packages?
Why do I have to use some internal relay if I need to just shut down an output?  ???
« Last Edit: February 08, 2009, 10:41:37 AM by bl »
Logged

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re:Where is normally closed output symbol?
« Reply #3 on: February 08, 2009, 11:52:49 AM »
Inverted output is not a necessity in most program as they can be programmed with regular outputs. If you need to, just turn on a relay and used the NC contact of relays to trigger the output.

If you are just beginning to learn about ladder logic programming you can visit http://www.plcs.net to get some basic learning course.
« Last Edit: February 08, 2009, 12:17:22 PM by support »
Logged
Email: support@triplc.com
Tel: 1-877-TRI-PLCS
Pages: [1]
« previous next »