Hello, thank you for the reply.
TL Version 3.1
TriLOGI Version 6.14
Yes the TLServer is running.
Yes, I've done the IR* command, here's a cut-n-paste of that:
COM1 opened at: 38400bps.
(Warning: No Response from PLC !)
(Warning: No Response from PLC !)
COM1 opened at: 9600bps.
IR*
At 38400 I get the warning, at 9600 it just sits there without a response at all.
When trying to access it through TriLOGI it keeps asking me to enter the PLC's ID, which when I click the Detect ID button, it waits a while then says:
PLC responds incorrectly to HostLink Commands
1. Check if TLServers Com port is working
2. Pause the PLC if it sends data out of the com port.
Not sure I do #1, other than I know the PC's port is working because I use the same port to hook up to the touch screen with no problem.
Thanks for your attention.