Internet PLC Forum
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Home
Help
Search
Login
Register
Internet PLC Forum
»
General
»
Technical support
»
wireless PLC connection
« previous
next »
Print
Pages: [
1
]
Author
Topic: wireless PLC connection (Read 11158 times)
dan
Newbie
Posts: 47
wireless PLC connection
«
on:
May 23, 2006, 08:52:41 PM »
Hi,
What will be the way to connect two PLC's (master slave) thru a wireless connection
Dan
Logged
support
Global Moderator
Hero Member
Posts: 3174
Re:wireless PLC connection
«
Reply #1 on:
May 24, 2006, 10:38:49 AM »
You can use two radio modem such as those made by Maxstream or visit:
www.keytelemetering.com
The radio modem connects to the PLC's RS232 port and you can use NETCMD$ to send host link commands from the master PLC to the slave PLC.
Logged
Email: support@triplc.com
Tel: 1-877-TRI-PLCS
dan
Newbie
Posts: 47
Re:wireless PLC connection
«
Reply #2 on:
May 25, 2006, 10:05:29 AM »
Hi,
1.What I need is a very short distance and I was hopping that I can use two XServer and to create a wireless network.Will this work
2.Do I have to use to M series PLC or I can use a H as a slave?
Dan
Logged
dan
Newbie
Posts: 47
Re:wireless PLC connection
«
Reply #3 on:
May 25, 2006, 10:08:05 AM »
Hi,
I ment the Tseries PlC
Dan
Logged
support
Global Moderator
Hero Member
Posts: 3174
Re:wireless PLC connection
«
Reply #4 on:
May 25, 2006, 10:12:49 AM »
You can connect the M-series PLC to XServer, and the XServer connect to a wireless bridge to your wireless LAN. This way each M-series PLC is part of the LAN and they can send message to one another.
Logged
Email: support@triplc.com
Tel: 1-877-TRI-PLCS
Print
Pages: [
1
]
« previous
next »
Internet PLC Forum
»
General
»
Technical support
»
wireless PLC connection