I modified the N.JS file to accommodate some additional remote I/O. The comment at the top of the file says max file size is 16K. My modified file slightly exceeded the maximum limit of 16K. After I downloaded it using FileZilla to the Nano-10 PLC, I can no longer connect to the PLC via the Ethernet port.
I can connect to the Nano PLC using i-TRiLOGI software with the localhost 127.0.0.1:9080 and retrieve the parameters from the PLC via the RS485 port.
Using i-TRiLOGI , I can go to Controller, Ethernet and ADC Configuration and download and change my IP address information etc.
I can connect via the RS485 port and download the original i-Relay.PC6 file and on line monitor it with i-TRiLOGI, but I cannot connect to the Ethernet port.
I cannot get FileZilla to connect to the server so I can delete the N.JS file that is too big and load a smaller one.
When I connect the PLC to my router, it does not recognize the Nano-10 device. I cannot ping the device from my laptop connected to the network.
The Nano-10 has been connected to my network for several months now and it has been working fine until I tried to download this file.
Did downloading the large file do something to keep me from communicating with the PLC via the Ethernet port? Can you suggest how I can connect to the Nano 10 to download a smaller version of N.JS and the 0.htm file, if necessary?