Author Topic: Enclosures  (Read 11287 times)

redpike

  • Newbie
  • Posts: 4
    • View Profile
Enclosures
« on: October 06, 2006, 09:22:55 AM »
I am looking for separate enclosures, with standoffs, for my T100MD888+ and two I-7018s. Preferably, these would be made out of plastic, and would be relatively easy to seal. I am going to be installing them in my car, possibly under the hood...

I also need a source for the proper resistor for a 12VDC installation of the LCD-420 display unit.
« Last Edit: October 06, 2006, 09:43:23 AM by redpike »
Mahalo and Aloha,
Red Pike, Naval Architect/Marine Engineer, USCG Licensed First Assistant Engineer

"Sustained superior performance through continuous incremental improvement."

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re:Enclosures
« Reply #1 on: October 06, 2006, 10:23:19 AM »
The easier way may be to purchase the DIN-KIT-2 for the T100MD+ and since the I-7018 already have DIN rail clip built-in, you can mount the whole assembly on a DIN rail.

You will need to check with industrial electrical supplier for a suitable enclosure. Check digikey or Jamesco catalog as a start.

Other users may have suggestions of good sources for enclosure vendors.
Email: support@triplc.com
Tel: 1-877-TRI-PLCS