wireless PLC connection

[dan]

Hi,

What will be the way to connect two PLC's (master slave) thru a wireless connection

Dan

[support]

You can use two radio modem such as those made by Maxstream or visit: www.keytelemetering.com The radio modem connects to the PLC's RS232 port and you can use NETCMD$ to send host link commands from the master PLC to the slave PLC.

[dan]

Hi,

1.What I need is a very short distance and I was hopping that I can use two XServer and to create a wireless network.Will this work

2.Do I have to use to M series PLC or I can use a H as a slave?


Dan

[dan]

Hi,

I ment the Tseries PlC

Dan

[support]

You can connect the M-series PLC to XServer, and the XServer connect to a wireless bridge to your wireless LAN.  This way each M-series PLC is part of the LAN and they can send message to one another.