Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - TriRob84

Pages: [1]
1
Technical support / web page 0.htm DM32 value display
« on: October 07, 2019, 02:14:33 AM »
Hi, on base 0.htm page there are DM1 to DM4 values displayed, what directions should I take if I want to display a value from DM32 double register  in one of display fields. My Nano-10 is collecting data from external Energy meter via Modbus where used energy counter is above 65565 so it clocked up next register by one. Im seeing 13885 and 1 in two registers, I also can see correct DM32 value in Nano just don't know how to change what type of register is displayed on HMI display (double instead of integer) and/or how to read DM32 in N.js file.Regards. 

2
Technical support / NANO-10 plc - PART NUMBER NEEDED
« on: April 11, 2015, 10:08:02 AM »
Hi,

Need somebody to advise on part No of marked red IC (see link below)- mine blown up and I'm not able to read anything of it.
Thanks in advance.

www.robcomcorp.pl/nano10/nano10.JPG

3
Technical support / Nano PLC with Advantys OTB
« on: July 25, 2012, 05:09:03 AM »
Hi there,

Wish to know what is the best way to read I/O statuses back to Nano PLC from device (Advantys OTB) over ethernet.

Using modbus poll software i can read device registers:
1(bits 0 to 11 each one for input status)
2 temperature channel 0
3 temperature channel 1
4 temperature channel 2
5 temperature channel 3

Thanks for any advice.

Pages: [1]