Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - jrustang

Pages: [1] 2
1
Technical support / Re:Number of hours - Suggestions anyone?
« on: September 16, 2013, 10:02:32 AM »
I'ld Try saving the info to the PLCs EEPROM...

2
Technical support / Re:Android App for Nano and Fmd Serie
« on: May 02, 2013, 01:04:37 PM »
Hi:

Do you have this App for iOS?

Thank you.

3
Technical support / Re:Permante Magnet DC Motor control
« on: April 08, 2013, 08:33:09 PM »
Thank you very much for the info... I"ll check on that...

4
Technical support / Re:Permante Magnet DC Motor control
« on: April 08, 2013, 12:38:26 PM »
Thank you for the repplay and the info.

I have another question: Would this Solid State Relay work with the PWM Output of the PLC? Would I be able to control the speed of the motor?

Is my first time with this type of device.

Thank you.

5
Technical support / Permante Magnet DC Motor control
« on: April 08, 2013, 09:43:47 AM »
Hi!! i'm trying to control a PMDC Motor (130DCV 14Amps) used in a treadmill exercise Runing machine using a TM888 PWM output.

 On the TM888 User Manual Pag. 1-6 there is a Circuit Diagram using the Mosfet irf530 witch can handle up to 12amp and 100volts.

My question is: is there any other Mosfet that I can use to do my project? Or I can use this one with the inconvenience that it's not gonna give me all the power that I need...
Is the IRF53 gonna get over heated?
What frecuency should I use in the Tbasic Program? 60hz? Or more?

Any ideas would be apreciated...


Thanks.

6
Opinions & Feedback / Nano-10 Iphone App
« on: November 16, 2012, 07:13:59 PM »
Hi!! Is there any App on the App Store designed for the Nano-10 to be controlled using an iOS device?

I know that you can use safari web browser to controll it, but it would be so much better to have an App specially designed for that.. To control In,Outs,Relays,DMs, etc...

Thank you.

7
Technical support / Re:DSC Keypad
« on: January 21, 2012, 04:36:39 AM »
OK, Thank you for your Help.

J.Rustang

8
Technical support / Re:DSC Keypad
« on: January 20, 2012, 06:16:45 PM »
Here is a Pics of the Keypad...

9
Technical support / Re:DSC Keypad
« on: January 20, 2012, 06:13:42 PM »
The Brand is Honeywell 6150. It does not have an RS-485 or RS-232 port. It only has a Data-In/Data-Out connection.

Honestly, I don't know if the keypad can send ASCII strings. Any ideas of how can I find that out?

Thank You.

J.Rustang

10
Technical support / DSC Keypad
« on: January 20, 2012, 01:56:06 PM »
Hello:

I would like to know if it is possible to use a DSC Keypad Model: 6150 or 6160 to control a PLC, using the COM Port RS-485 on the PLC?

I dont know what protocol the Keypad use...


Thank you...


J.Rustang

11
Technical support / Re:Nano-10 Write variable problem
« on: June 14, 2011, 05:34:05 AM »
The name is: GJModbus version 2.1.11.17

here is a link to download it...

http://dl.dropbox.com/u/27291071/GJModbus%202.1.11.7.EXE

Thank you.


12
Technical support / Nano-10 Write variable problem
« on: June 13, 2011, 07:21:14 PM »
Hello everyone,

I'm having a problem with the Nano-10 Ethernet port.

I can connect to the PLC through it's com port No. 1 using "Modbus TCP Server" and "ASPIC" as the HMI, and control everything fine (that include, activating internal relays and reading the data of many variables).

The problem comes when I tries to use the Ethernet port to monitor and control the PLC. I can read the data of all the different variables that I need, but when I tray to activate  the internal relays of the Nano-10 it's just not accepting the command.

The problem Only show up when I use the Ethernet port. Using the Com Port No. 1 is not giving me any problems.

I made a few test transferring a simple program that consist on a single internal relay that activate an output, but it does not work when I tries to activated it from the HMI Program.

Any help will be appreciated.

J.Rustang

13
Technical support / Trilogi PLC and Ipod Touch/Iphone monitoring
« on: January 22, 2010, 11:12:33 AM »
I'ld like to know if there is any Iphone/Ipod Touch application that allow me to monitor my Trilogi PLC witch is connected to my WiFi network at work.

Thanks!!!

14
Technical support / Re:Analog Output on the TM100+ 4832
« on: September 06, 2007, 07:54:00 PM »
That's why you need to talk to the expert ones....
That was the answer...  Thank you...!!!

15
Technical support / Re:Analog Output on the TM100+ 4832
« on: September 05, 2007, 10:31:28 AM »
Thank you for your answer.
I already had conectet the 5v power supply and is well conectet 'because I have allready install an analog divice on the analog input number 1 and is working fine. And that's why I don't find an explanation why is not working

Have Another Idea that can help me?

Thank you very much !!!

Pages: [1] 2