Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - FQ-ONG

Pages: [1]
Technical support / Send SMS Message
« on: April 25, 2011, 03:10:37 AM »
Is it possible to send SMS message from F-series PLC with Ethernet Port connect with Internet linked network without the GSM modem?

Technical support / A few question about Real Time Clock.
« on: March 06, 2007, 08:21:11 PM »
  • If the PLC without MX-RTC module, can I set Real Time Clock. (power is always on)
  • If power still on, how long the Real Time Clock can maintain and not switch back to default clock.
  • Can the custom make application program like VB to update the Real Time Clock, or not? And How?

Thank You.

Technical support / PLC remote control
« on: January 03, 2007, 03:50:45 AM »
Can we remote and control the PLC?

Technical support / TriLogi Version 6.12
« on: December 13, 2006, 10:27:04 PM »
Does Trilogi 6.12 support H-series PLCs and E-series PLCs?

Good Luck!


Technical support / An inconceivability event of PLC ???
« on: November 15, 2006, 03:09:23 AM »
Hi All,

We face to an enigmatical event of PLC.

This PLC had operation in good condition for 10 days before this enigmatical event happen.  Suddenly, the PLC switch off all the I/O, reload the program and turn on the I/O. After 2 minutes, PLC repeat this few step again. Its frequently happen in two minutes time without rhyme or reason.

After that, we transfer a BLANK program into PLC, that few step switch off and on the I/O was not happen again. After monitoring in one hour, we transfer back the original program into PLC, and it also doesn't have any abnormity happen untill now.

Before this abnormity happen untill it operation back to good condition, all wiring for I/O, analog I/O, power supply and RS485 unchanged and no unpluged.

Does anybody have an experience with this event before?

Our customer request: "Please investigate the actual route cause to eliminate the problem to the future. Please narrow down to the detail."

Thank You,


Technical support / PLC auto reset (urgent)
« on: November 02, 2006, 03:11:23 AM »
Hi all,

I have a very urgency question:

T100MD+888 PLC automatic reset frequently (around 2 minutes per reset) by
itseft? (not program command and not the user pressing the reset button)
How to solve this?

As you know some item control by PLC output cannot frequently on / off, I need to solve this ASAP.

Thank You,


Technical support / PLC send message to pager
« on: October 26, 2006, 07:00:36 PM »
Can PLC automatically send message to pager?
How it work?

Thank you,


Technical support / TBASIC Statements & Functions
« on: June 17, 2006, 12:33:55 AM »
May I know more about TBASIC Statements & Functions. (More explanation then TBASIC Keywords on TriLogi Help)
other than status (1), status (2) and status (8), is it still have another status (n) like status (3), status (4) ......?
SETSYSTEM 4,data, SETSYSTEM 5,data, SETSYSTEM 6,data......, what default system?s parameters will be change?
Any more command that does not listed in the TBASIC Keywords Help?

Thank You.

Pages: [1]