Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Tito

Pages: [1] 2 3 4
1
Technical support / F1616BA (Xbee) and standalone circuit XBEE
« on: June 21, 2013, 10:17:42 AM »
Hi,
I did manage to create Coordinator, Router and establish communication between this XBee's in X-CTU. One of this Xbee i do installed in F1616BA and other one in standalone circuitry. I did configure in this manner

F1616BA                                                           Standalone Circuity (sending Digital signal upon push button been engerized

ATID 3001                                                         ATID 3001
ATMY 2                                                              ATMY  1
ATD0 4                                                              ATDL   2
ATIA  1                                                              ATD0  3
                                                                         ATPR   0

How i can capture the change of ATD0 (4) in F1616BA. Any AT commands?

2
Technical support / Re:Unable to open the "Tri ExcelLink Version 2.0
« on: April 22, 2013, 07:51:41 PM »
 :) :)

i did get technical support from Singapore base. I did uninstall all the jre files and leave behind the latest version j2re1.2_19.

Its works superb.

cheers

3
Technical support / Unable to open the "Tri ExcelLink Version 2.0
« on: April 22, 2013, 03:33:33 AM »
Hi, I did recently purchase ExcelLink Version 2.0. Upon successfully installation and up gradation and while execute the "ExcelLink Version 2.0" the "Tri - ExcelLink Version 2.0" application program doesn't pop up. i did test in 2 pc's on XP OS, same results ->  nothing.


In C:\TRiLOGI\ExcelLink folder do contain the following files after installation:-
-Coruotine
-helps
-ExcelLink20.jar
-EXLCONFIG2.CFG
-testmacro.xls
-unins000.dat
-unins000.exe

In C:\Program Files\Java do contains the following files
-j2re1.4.2_06
-j2re1.4.2_19
-jre7

I am able to open :-
         - PLC WebServer Version 3.17
         - iTRiLOGI Version 6.45

but not the ExcelLink Version 2.0

Thank you

4
Technical support / Re:nano com port (RS485) to Auto RS 485 and GSM modem
« on: January 27, 2013, 09:56:39 PM »
Hi, I did as you said.
1) Powered up
2) transfer program to Nano.
3) monitor online

Which i did earlier.

Now I do turnaround time adjustment knob (0.5ms - 1.5ms) between and seem to be working.

thank you. ;D ;D

5
Technical support / nano com port (RS485) to Auto RS 485 and GSM modem
« on: January 26, 2013, 08:21:06 PM »
Hi, Mr. Gary & I did 2 way communication between FMD88-10 with GSM modem to send & receive SMS was successful done.

Currently i am trying out with Nano board , GSM modem and using Auto-RS485 between for comm port purpose. I am unable to establish communication. Mean while i did test out with ADAM 4520 (RS232-RS485 isolated converter) seem to work fine.

Is that possible to establish communication with Auto  RS485?

Thank you.

6
Technical support / Re:Omoron CP1E N30
« on: September 09, 2012, 06:10:01 PM »
 ;D Hi
I did manage to sort out that after re-configure the serial cable according to omron connection using RS232 ports.

7
Technical support / Omoron CP1E N30
« on: September 08, 2012, 10:50:30 PM »
Hi,
I am trying to establish communication between PLC WebServer (serial port setup) and Omron.

I did set up as follows:-
Comm: com1
Databits: 7
Parity: Even
Baud rate : 9600
Stop Bits: 2
Timeout:500

In command string  : @00MS       'STATUS READ
follow by pressing "FCS"
gives FCS = 5E
than type in command string : @00MS5E*
follow by return key
message prompt : Warning no response form PLC.
i did use the same cable which used in FMD. Please do advice

8
Technical support / Re:Direct LAN connect with FMD88
« on: August 28, 2012, 10:02:11 AM »
 ;D,  8), Successfully achieved. Last but not least. i didn't get it on

"If you want more than one PLC to be accessed from the Internet, then use a different public WAN port for each PLC. The private LAN port may be the same as the public WAN port or it can be different (e.g. all PLC can be same private LAN port = 9080 but you use a different WAN port for each PLC)."

Let say i do have four PLC's to be controlled from internet.The board ip might be different or not but the port will be same if do follow default setting. From your statement, i do have change accordingly example:-
FMD no1 - port 9080
FMD no1 - port 9081
FMD no1 - port 9082
FMD no1 - port 9083

In my modem on forwarding site i will set:-
WAN            LAN
Begin   End    Begin    End
9080    9083  9080     9080

Do i get correctly. Cheers

9
Technical support / Resolving DNS - ERR:07-DNS UnResolved
« on: August 28, 2012, 09:20:28 AM »
 :) Hi,

I am testing Ethernet\TestEthernet.PC6 program. I did hookup my board to internet hub with ip set to 192.168.0.5 with using "F Series Basic Configuration"

My default gateway is 192.168.0.254
Subnet Mask is 255.255.255.0

While running the program, i did get the ip address in LCD as 192.168.0.5 and on next step i do get "Resolving DNS - ERR:07-DNS UnResolved."

I did went into cmd in type "nslookup time.nist.gov the result :-
Server: ntp.glb.nist.gov
Address: 64.147.116.229
Aliases: time.nist.gov

But while execute fnGetDNS, something i do missing over here.
Please do advice.
Thanks in advance.

10
Technical support / Re:Direct LAN connect with FMD88
« on: August 27, 2012, 08:30:19 PM »
Hi referring from section 2.7, i do manage to go to the setting page which is "forwarding". But unable to do the setting. Please do advice on setting part.

11
Technical support / Re:How to send data from FMD88-10 direct to MSSQL
« on: August 27, 2012, 11:48:35 AM »
 ;D Chere's.

12
Technical support / Re:How to send data from FMD88-10 direct to MSSQL
« on: August 27, 2012, 10:57:05 AM »
 :-[ oops.

Before go so far in php, is that possible for me to try out using C#. Using LAN connection between PC and FMD. C# collect the data and pump in MS SQL either local or online.

Please do advice.

Thank you.

13
Technical support / Re:Direct LAN connect with FMD88
« on: August 27, 2012, 10:43:29 AM »
Hi, Now i am moving a step ahead on online communication.

Setting 1
I did hook up my pc to internet with ip : 10.1.1.3 and default geteway : 10.1.1.254 and subnet mask : 255.255.255.0

Setting 2
My board to internet directly by  with wireless n router with using USB Adapter and my board ip : 192.168.1.5

Initially i did try out connect wireless in setting 2 and seems working fine.

While trying out Setting 1 & Setting 2, unable to establish connection.

Please do advice, the scenario of my setting 1 as though public network.

14
Technical support / Re:Direct LAN connect with FMD88
« on: August 27, 2012, 09:32:09 AM »
 ;D hi Finally,

After trying all the possibility and go through the manual again and again, finally manage to got in online monitoring. In the attachment after click to disconnect the local host and set ip of the board it works superb.

Cheers  

15
Technical support / Re:Direct LAN connect with FMD88
« on: August 26, 2012, 11:08:30 AM »
After getting advice from senior online forums member, i do put a hub between pc and FMD for communication.
My pc ip (obtain automatically) : 192.168.1.100
My Baord ip : 192.168.1.5
Port #9080
Subnet mask 255.255.255.0
Gateway IP 192.168.1.1

Do manage to login with server by using pc ip and which appears in "TRiLOGI Server"(192.168.1.100). Do manage to "Open(TLServer 3)" file but unable to transfer program  to PLC.
Error message as follow:-

PLC responds incorrectly to Hostlink commands
1. Check if TLServer's com port is working
2. Pause the PLC if it sends data out of com port

My i-TRiLoGI version 6.43
My Internet TRiLOGI Server version 3.16D
Please do advice. Thank you

Pages: [1] 2 3 4