Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Exit240

Pages: [1]
1
Technical support / Re:Need advice on Nano-10
« on: May 02, 2010, 10:01:56 PM »
     Thank you very much, converting signals to the correct incoming voltage and attaching peripheral device(s) to control final fan speed will be within the realm of my understanding, it was the software control that had me concerned most of all. It is an exciting prospect that I could link to a customer's product remotely and change values and parameters based on their needs. Thank you for the information, I will be placing an order as soon as circumstance allows.

2
Technical support / Need advice on Nano-10
« on: May 02, 2010, 11:28:52 AM »
I apologize about the general nature of my question, but I am looking to fill a requirement for a prototype product and expert advice would be greatly appreciated to know whether or not I am barking up the wrong tree.

     I need a PLC or other PC compatible/programmable controller, and the Nano-10 seemed to fit the bill. I need the device to control an inline duct blower (115v, 257w AC). I realize I will need a separate unit or driver. The PLC would have to take into account the fan's rpm, and the inputs of 2 other sensors (with a signal range of .01-6v each)
 
     The PLC would need to be programmable to take the 2 input voltages plus fan rpm and vary the output to control fan speed based on that data, in a linear fashion. Provisions must be made to ease fan into full rpm, or full acceleration or deceleration, depending on certain variables.  

     I absolutely will be hiring a local programmer to work with the software. If you need a round peg to fit a square hole I'm of use, in the digital arena I'm a little lost. I appreciate the help!
                                             
                                               
                                              - Justin, Exit240 Performance

Pages: [1]