1
Technical support / Nano-10 on 12V
« on: January 31, 2013, 10:42:25 PM »
Has anyone run the Nano-10 on 12V? Is so, any issues I should know about?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Technical support / RS232 on Nano-10
« on: December 15, 2011, 02:25:23 PM »
Is there a simple and inexpensive way to convert the Ethernet port on the Nano-10 to RS-232?
3
Technical support / Counting Pulses on PMON input
« on: December 13, 2011, 07:29:29 AM »
I would like to count the pulses arriving at input #4 on a T100MD. This pin is defined as a pulse measurement pin. Can I also use it to increment a counter? If using a regular counter can I expect it to accurately pick up a 30Hz signal? Program size is about 2000 words.
4
Technical support / Re:PLC No Response
« on: January 21, 2010, 07:25:09 PM »
Thanks for the reply. I was able to solve the problem by increasing the turn around delay on the MMI to 30ms.
5
Technical support / PLC No Response
« on: January 20, 2010, 01:36:53 PM »
Have a T100MD888, Trying to connect an MMI-6050 via RS485. Using MODBUS ASCII. Was getting PLC no response showing up regularly. Used SETSYTEM 3,0 and now have no connection at all. Tried SETSYSTEM 3,1, still no connection. HELP!
Pages: [1]