Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - kenobe

Pages: [1] 2 3 ... 5
1
Technical support / Re:sine trig function
« on: June 09, 2011, 06:11:11 AM »
understood.
thank you very much

2
Technical support / trigonometric function
« on: June 06, 2011, 12:06:52 AM »
I would like to know how T100MD handle trigonometric functions

3
Technical support / sine trig function
« on: June 05, 2011, 12:46:34 AM »
can any body please tell me how to calculate the
sine trig function value using TBASIE
Thanks :o ???

4
Technical support / Re:wirte IO command
« on: May 20, 2011, 12:26:45 AM »
thank you very much for your advise
appreciated

5
Technical support / wirte IO command
« on: May 19, 2011, 02:34:39 AM »
Hi I am using the t100md 888 plc for my project
if I issue the wirteIO or readIO command from VB,eg

@01WO00100*+chr(13)

or

@01WI0002*+chr(13)

will the output LATCHED itself?
will the input LATCHED itself?

Thanks

6
Technical support / Re:reading datafile from tlserver
« on: May 02, 2011, 09:49:55 PM »
Thank you very much

7
Technical support / Re:reading datafile from tlserver
« on: May 02, 2011, 06:27:35 PM »
appreciate your help.
could you pls tell me where can i find some examples?
Thanks

8
Technical support / reading datafile from tlserver
« on: May 02, 2011, 01:13:22 AM »
HI
I am trying to read some datafile from the tlserver.
I am using t100md 888.
after issuing the command

PRINT #1 <READ datefile.txt> </>
where do i find the downloaded data? Can I specify the data locations in PLC  to store the downloaded data?
Thanks ::) ::) ::)

9
General Discussions / t10md reading text data file from tlserver
« on: May 01, 2011, 05:54:55 AM »
Hi after the t100md 888 issued the read file command
PRINT #1<READ datafle.txt>
</>
where is the data stored in?
is it in the DM[]?
can I specify where the data should be downloaded to?
Thankshttp:// ::) ::)

10
Technical support / Re:4 to 20 mini amp analog input
« on: January 20, 2011, 08:22:05 PM »
Hi
Thanks for your advise, I will try using seperate power supply for the sensor and the PLC. and make the common ground
Thanks

11
Technical support / Re:4 to 20 mini amp analog input
« on: January 20, 2011, 12:02:50 AM »
I have done exactly what you have advised, and that does work
Thanks, the voltage at analog input is 9V.

12
Technical support / 4 to 20 mini amp analog input
« on: January 19, 2011, 08:38:01 PM »
 ??? ??? ???Hi
I am using a T100MD 888 plc tring to read an analog  temperature sensor with 4 to 20 mini amp output.
I connect the sensor to analog #1 according to the T100MD888 user manual.
Hower, when I check the voltage at channel 1, it is always 9 volt regardless of the temperature change.
When I isolate the sensor from the PLC, the output of the sensor is 0 to 4 volt and current is well within 4 to 20 mA.
When I connect the sensor ouput to the PLC, the volage at the input channle #1 is always 9v.
Could this be a current loading problem. please help
Thanks

13
Technical support / Re:random number
« on: July 03, 2010, 12:03:24 AM »
thanks
how about using nested RTC?

14
Technical support / random number
« on: June 30, 2010, 12:58:52 AM »
Hi
How do I get a random number using TBASIC?
I am using T100md 888 ::)

15
Technical support / Re:convert hex number to decimal number
« on: January 17, 2010, 09:46:02 PM »
HI
Your suggestion works .
Thanks

Pages: [1] 2 3 ... 5