1
Technical support / RS485 baud rate
« on: March 01, 2010, 04:57:38 AM »
Hi,
Any way to set the RS485 baud rate to 11520 ?
regards
sengbeng
Any way to set the RS485 baud rate to 11520 ?
regards
sengbeng
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Technical support / Porbelm using internal timer
« on: July 09, 2006, 07:03:07 AM »
Hi,
I am using the internal Timer to control the solenoid on/off timing. Found that the timing is not accurate when i measure it by scope. For example the timer setting is 20ms but the actual output can be vary 1 out of 10 times to 40 ms.
Can it be due to inconsistent scan time ? Program with number of custom function will cause irregular scan time ? How to over come the problem ?
regards.
sengbeng
I am using the internal Timer to control the solenoid on/off timing. Found that the timing is not accurate when i measure it by scope. For example the timer setting is 20ms but the actual output can be vary 1 out of 10 times to 40 ms.
Can it be due to inconsistent scan time ? Program with number of custom function will cause irregular scan time ? How to over come the problem ?
regards.
sengbeng
Pages: [1]