Internet PLC Forum
General => Technical support => Topic started by: woody on August 17, 2012, 08:21:42 AM
-
Hello,
Sorry for my simplicity. Currently I am using an E10Relay PLC to switch 240v AC and I am using all 4 of the outputs.
I would like to add an interface for users to change variables.
As suggested here, the nano-10 may be what I am after as I could use a web interface.
I understand with the nano you have the 2 relay outputs plus 2 multi purpose outputs. Are the multi-purpose outputs capable of switching 240vac or would I have to use two 240vac relays with a 24vdc coil?
Thank you
Woody
-
The two solid state outputs can only switch 24V DC load. So if you want to switch 240VAC you DO need to use an intermediate relay with 24V coil.