Internet PLC Forum

General => Technical support => Topic started by: abello87 on January 03, 2012, 04:31:24 PM

Title: Running program from PC
Post by: abello87 on January 03, 2012, 04:31:24 PM
I've seen an example project run from the PC using the simulator run setup to actuate various outputs for testing/"show-n-tell". At the time I was just being introduced to PLCs so I didn't bother to ask how they set it up.

Is that possible with an H-series PLC with the wintrilogi program (v3.5)?

Thanks much,

Abello
Title: Re:Running program from PC
Post by: support on January 03, 2012, 08:28:08 PM
If you put the WinTRiLOGI software into online monitoring mode then it will show the status of all the I/Os and you can also force set an output (if it weren't controlled by the logic) by clicking on it. Right mouse click toggles the output whereas left mouse click turns on an output when left button is press and turn off the output when the left button is released.
Title: Re:Running program from PC
Post by: abello87 on January 03, 2012, 11:26:54 PM
Excellent.

Thank you very much.

Abello