Internet PLC Forum

General => Technical support => Topic started by: Artetavn on March 14, 2006, 05:57:26 AM

Title: How can i draw a diagram like this?
Post by: Artetavn on March 14, 2006, 05:57:26 AM

I want to draw a ladder diagram like below but i can't find the way to do it with trilogy

    in0               out0
----||------------(  )
        |   in1       out1
        |---||------(  )

with the #5 tool i just can draw a parallel contact with some other contact. Although i can redraw another "in0" input then follow with an "in1" in a new circuit but it will be painful when there are so many branch in the diagram. Can u help me solve this problem. Thank you very much.

Title: Re:How can i draw a diagram like this?
Post by: support on March 14, 2006, 06:40:19 AM

The [ILock] and [ILoff] special functions provide an logical equivalent to what you want to do. Please read the help instructions on these two functions to understand how to use them.

Title: Re:How can i draw a diagram like this?
Post by: arteta on March 14, 2006, 06:37:11 PM

  Thank You, i will try this when back to home.