Internet PLC Forum

General => Technical support => Topic started by: Will Steed on May 04, 2004, 08:10:02 PM

Title: LCD Bezel
Post by: Will Steed on May 04, 2004, 08:10:02 PM

Hi, just wanted to know if you could recommend mounting bezel's for your 4 X 20 and 2 X 20 LCD Displays.  I want to panel mount them, and I would like it to look fairly professional.

Thanks,


Will

Title: Re:LCD Bezel
Post by: support on May 05, 2004, 11:23:52 AM

Unfortunately there wasn't standard off the shelve bezel for the LCD420 and LCD216. The only model we have mounting bezel is the MD-HMI. For LCD420 and LCD216, typically the OEM will cut a rectangular hole on the panel and 4 mounting holes with counter-sunk chamferred so that the mounting screw can sink into the panel. Optionally apply a printed lexan cover on top of the panel to improve aesthetic.

Title: Re:LCD Bezel
Post by: ohioan1 on March 22, 2012, 11:50:56 AM

This was hard to find but found one.

http://www.dhmicro.com/plastic.html

http://digital-diy.com/forum/electronics-projects/acrylic-bolted-joints-and-cemented-windows-t2093.html

[Moderator's note] - Thank you very much. This is helpful information for our readers.