Internet PLC Forum

General => Technical support => Topic started by: JRobinson on March 31, 2016, 05:01:35 AM

Title: Bulk program download
Post by: JRobinson on March 31, 2016, 05:01:35 AM

We are about to embark upon a software update of over 150 sites. Is there a more automated or possibly command line loader available to help with this task?

Title: Re:Bulk program download
Post by: support on March 31, 2016, 08:26:22 AM

You can send in a request to obtain the CO5Uploader program as explained in this thread:

http://www.triplc.com/yabbse/index.php?board=3;action=display;threadid=2220&start=0#msg7930

You can generate the CO5 file from your i-TRiLOGI software and the end user can use the CO5uploader to upload the compiled file to the PLCs. The PLC could be connected via Ethernet or the serial link and the CO5Uploader can be used for either type of networking.

If all the controllers are on site and each have an IP address that is the easiest, you can simply select and enter a new IP address for each controller that you want to upgrade and then upload the program.

Title: Re:Bulk program download
Post by: JRobinson on April 02, 2016, 08:57:30 PM

Thanks, downloaded OK.