Internet PLC Forum

General => Technical support => Topic started by: ramseyru on November 09, 2012, 07:16:51 AM

Title: Downloading program outside of i-TriLogi
Post by: ramseyru on November 09, 2012, 07:16:51 AM
Is there a way to download a new ladder-logic program to the FMD88-10 PLC other than through the i-TRiLOGI software?

Once deployed to the field, the PLC would be networked to an embedded system (not Windows). I would like for the embedded system to be able to download upgraded ladder-logic program to the PLC. Is there a way to do that?
Title: Re:Downloading program outside of i-TriLogi
Post by: support on November 11, 2012, 11:44:14 AM
There is no straight forward way to do it.  Technically it is feasible as long as the embedded system you mentioned has access to the compiled code and know how to intepret the codes and initiate a serial transfer to the PLC. However, unless it is a large OEM application it will not be worth the cost and effort to customize such a procedure.

If you have an OEM appication that could be using 100s of such setup, you can email to support@tri-plc.com to inquire what needs to be done and the cost of implementation.