Internet PLC Forum

General => Technical support => Topic started by: redpike on October 06, 2006, 09:22:55 AM

Title: Enclosures
Post by: redpike on October 06, 2006, 09:22:55 AM

I am looking for separate enclosures, with standoffs, for my T100MD888+ and two I-7018s. Preferably, these would be made out of plastic, and would be relatively easy to seal. I am going to be installing them in my car, possibly under the hood...

I also need a source for the proper resistor for a 12VDC installation of the LCD-420 display unit.

Title: Re:Enclosures
Post by: support on October 06, 2006, 10:23:19 AM

The easier way may be to purchase the DIN-KIT-2 for the T100MD+ and since the I-7018 already have DIN rail clip built-in, you can mount the whole assembly on a DIN rail.

You will need to check with industrial electrical supplier for a suitable enclosure. Check digikey or Jamesco catalog as a start.

Other users may have suggestions of good sources for enclosure vendors.