Internet PLC Forum

General => Technical support => Topic started by: plc_user on September 16, 2006, 10:07:04 AM

Title: Max Voltage in on the E10Relay
Post by: plc_user on September 16, 2006, 10:07:04 AM

I just purchased an E10Relay, I was wondering if a 25.2VAC transformer would work in place of the mentioned 24VAC.  I have the former in my parts bin and I was just wondering if it was outside the parameter's of the unit?

Also, I didn't buy the starter kit, thinking that the Trilogi 5.3 software would program the unit, is this correct?  I have the 485 converter so that isn't an issue.

Many thanks in advance.

plc_user
 

Title: Re:Max Voltage in on the E10Relay
Post by: support on September 16, 2006, 09:26:58 PM

25.2VAC should have problem. You can use it with E10-relay+.

Unfortunately the E10 requires WinTriLOGI version 3.52.  TRiLOGI version 5.xx will not work with E10 or H-series. It works exclusively with M-series PLC (T100MD+ and T100MX+) only.  Please contact sales@tri-plc.com during office hour for helps on this matter.