Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - nheilBRO

Pages: [1]
1
Technical support / CALL statement
« on: August 25, 2006, 01:09:13 AM »
Hi,

Is the CALL statement on the TriLOGI 5.2 is able to call a program name, If not then how to CALL another program name from the main program.

thank...


nheilBRO

2
Technical support / MD-HMI(4x20) Input Problem
« on: July 18, 2006, 11:46:48 PM »
Hi there,

Anybody could suggest on this, I set the channel1 on my MD888+ for PWM to make it 12Vdc the output and its worked fine, I'd assigned a # for this channel on the HMI for turning ON/OFF the ch#1, now I can easily turned-ON the switch with the output of 12V but I cannot turned-OFF the ch#1. but in output 1,2,3,4,5,6 with 24Vdc I can easily ON/OFF. whats wrong in my program.

In my analysis, when ch#1 becomes 12V then I cannot trigger anymore.

thnks.

3
Technical support / Smart Home via PLC's
« on: June 26, 2006, 07:20:12 PM »
hi there,

I want to get an idea on how my appliances @ my office are controlled by the PLC's, like lights and aircondition, I have T100MD888+ PLC that I can use on this.

Anybody can help and give to me a sample diagram how my aircondition and lights are to be connected to PLC. I'll totally blackout on how the lights connected to the PLC.  Here is my e-mail:  "nheilarga@gmail.com"

thanks.


NheilBRO

4
Technical support / E10-npn+ Problem
« on: June 23, 2006, 06:49:27 PM »
Dear All,

My E10-npn+ was blown and the ULN2803A was burned, I'd replaced the damage IC (ULN2803A) but then when I turned-on it again, the indicator lights on output1 and output3 is always turned-ON which is before it was burned the 4 indicator lights is always OFF. Any possibility that my E10-npn+ IC  has been damaged also?

Any idea on this?

thanks

5
Technical support / X-Server Problem
« on: June 17, 2006, 08:51:47 PM »
Hi All,

Any suggestion or conclusion why I can't detect my X-server via RS232, from TL Server, but if I'd used RJ45 via LAN with my DHCP server, I can detect the X-server but I cannot do anythings since the IP of the x-server is DHCP. What I want is to trigger the X-server and change the IP to Static.


thanks.

6
Technical support / PLC and Appliance connection - Need Help
« on: June 17, 2006, 06:13:03 AM »
Hi All,

I am a newbee in this electronics gadget, I have T100MD888+ that I want to connect to a cannivalized CPU cooling fan, I cannot figure out how this things works. Anybody could give guidance< I will appreciate it.  thank a LOT.

Btw.

I am using TriLOGI 5.xxx for Lodder Logic Design.

Pages: [1]