Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - nheilBRO

Pages: [1] 2
1
Technical support / CALL statement
« on: August 25, 2006, 01:09:13 AM »
Hi,

Is the CALL statement on the TriLOGI 5.2 is able to call a program name, If not then how to CALL another program name from the main program.

thank...


nheilBRO

2
Technical support / Re:MD-HMI(4x20) Input Problem
« on: August 04, 2006, 05:22:14 PM »
thanks a lot, its working now.


3
Technical support / Re:MD-HMI(4x20) Input Problem
« on: August 03, 2006, 10:48:27 PM »
hi All,

any idea.... why when an add expansion card MD-EXP1616R on my MD888+, the MD-HMI keys is not responding?

thanks in adv.

4
Technical support / Re:MD-HMI(4x20) Input Problem
« on: July 19, 2006, 08:21:08 PM »
Hi Support,

OK...done.  Fantastic!!!!  ::)

Thanks.

5
Technical support / MD-HMI(4x20) Input Problem
« on: July 18, 2006, 11:46:48 PM »
Hi there,

Anybody could suggest on this, I set the channel1 on my MD888+ for PWM to make it 12Vdc the output and its worked fine, I'd assigned a # for this channel on the HMI for turning ON/OFF the ch#1, now I can easily turned-ON the switch with the output of 12V but I cannot turned-OFF the ch#1. but in output 1,2,3,4,5,6 with 24Vdc I can easily ON/OFF. whats wrong in my program.

In my analysis, when ch#1 becomes 12V then I cannot trigger anymore.

thnks.

6
Technical support / Re:Smart Home via PLC's
« on: June 29, 2006, 10:47:38 PM »
Hi Support,

thanks for your suggestion.

Yes, my Xpander2 has RS232 port for PLC's to talk to it. But since  T100MD888+ has only 1 RS232 port, it is possible or nothing wrong on the connection,  if I will provide splitter for RS232, so more PLC's could shared (like Xpander2, Xserver, etc.) from T100MD888+?.



nheilBRO.

7
Technical support / Re:Smart Home via PLC's
« on: June 29, 2006, 06:13:12 PM »
Hi, peterh_DK, support,

thanks for  the adviced.

Actually I have InfraRed (Xpander2) that could be setup with PLC's to control the aircondition and other wireless appliances. My concept on this system is to trigger only the appliances (ON/OFF) via internet. I am from Brunei Darussalam and we bought the items in Singapore.

nheilBRO.

8
Technical support / Re:Smart Home via PLC's
« on: June 29, 2006, 02:44:21 AM »
Hi,

I was very disappointed what is happening now, coz even my supplier of the PLC's never reply to my emails. I'll send several emails to him a days ago but until now he never reply to me.

Any training center or supplier conducted a training on this gadget. most probably in Honkong, Philippines, Indonisia, SIngapore or Malaysia?

thanks.


nheilBRO

9
Technical support / Re:X-Server Problem
« on: June 26, 2006, 07:46:06 PM »
hi Support,

What do you mean by X-cable set?, I have DB9 cable included on the package but the 1 end is female and 1 end is male. I buy an adaptor to become both are female and I'd used it to connect but still not working - can't detect the x-server.

I'll read the "NOTE" on the manual and it say:  "Since the Server's RS232 port does not control the RTS pin, you can only use an "Auto-turnaround type" RS232 to RS485 converter for this purpose, such as the Auto485 converter in "Auto" Mode".  it refer to what?

thanks.

10
Technical support / Smart Home via PLC's
« on: June 26, 2006, 07:20:12 PM »
hi there,

I want to get an idea on how my appliances @ my office are controlled by the PLC's, like lights and aircondition, I have T100MD888+ PLC that I can use on this.

Anybody can help and give to me a sample diagram how my aircondition and lights are to be connected to PLC. I'll totally blackout on how the lights connected to the PLC.  Here is my e-mail:  "nheilarga@gmail.com"

thanks.


NheilBRO

11
Technical support / Re:E10-npn+ Problem
« on: June 24, 2006, 03:33:30 AM »
hi support,

I think you're correct, the E10-npn+ have been knocked out too.

Any idea how much the (E10-npn+ CPU)? approx.

12
Technical support / Re:E10-npn+ Problem
« on: June 24, 2006, 03:26:55 AM »

hi FQ-ONG,

It was burned when I'll upload  a program via RS232, the ULN2803A goes on smoke. Now, after I'd repleaced the ULN2803A then a cannot access anymore the PLC (can't detect - error) and the outpu1 & output3 has a steady lights.


13
Technical support / E10-npn+ Problem
« on: June 23, 2006, 06:49:27 PM »
Dear All,

My E10-npn+ was blown and the ULN2803A was burned, I'd replaced the damage IC (ULN2803A) but then when I turned-on it again, the indicator lights on output1 and output3 is always turned-ON which is before it was burned the 4 indicator lights is always OFF. Any possibility that my E10-npn+ IC  has been damaged also?

Any idea on this?

thanks

14
Technical support / Re:PLC and Appliance connection - Need Help
« on: June 18, 2006, 06:04:02 PM »
thank for the advice.
I will contineu my experiment.

Btw.

the voltage of the cooling fan is 12v.

15
Technical support / Re:X-Server Problem
« on: June 18, 2006, 05:59:51 PM »
Thank for quick reply.

Sorry for my mis-interpretation of the problem ::)

Actually I' used the xServerConfig utility via RS232 but its doesn't work.

Pages: [1] 2