Internet PLC Forum

General => Technical support => Topic started by: Bruceh on July 09, 2007, 03:23:07 PM

Title: Communication flow control
Post by: Bruceh on July 09, 2007, 03:23:07 PM

Can anyone tell me what flow control the PLC will expect from a PC that it is communicating with:
None, Xon/Xoff or hardware?

Regards,
BruceH

Title: Re:Communication flow control
Post by: support on July 09, 2007, 04:17:13 PM

All our PLCs do not use flow control (whether hardware or software) when communicating with the host PC. The PLC normallyprocess incoming commands fast enough even at 38,400bps.