Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - InfiniteAutomation

Pages: [1]
1
Technical support / Re:Building automation PC GUI software
« on: March 12, 2015, 09:22:19 AM »
Hi, Mango Automation can be an excellent solution to this.  Here is a link that details how to set up the communication to a the PLC.

http://infiniteautomation.com/wiki/doku.php?id=otherproducts:triplc

We also have an embedded version of Mango that you can install in a panel with the PLC and works really well: http://infiniteautomation.com/index.php/hardware

We are happy to help if you have any questions.

Joel.

2
Technical support / Re:customise control web page
« on: July 24, 2012, 10:24:49 AM »
Hi Todd,

Without knowing more about your requirements I would suggest you use external software as your HMI.  I've used many of the nano and FMD products with the Mango software which works really well.  You can see some of the graphic potential at: http://infiniteautomation.com/index.php/news.html

If you want any more information please contact me at Infinite Automation Systems.

Thanks,
Joel.

3
Technical support / Re:HTTP Post
« on: March 08, 2011, 04:54:16 PM »
That is awesome, thank you so much, I'll have to play around with it to see if it works.

Thanks,
Joel.

4
Technical support / HTTP Post
« on: March 06, 2011, 05:44:24 PM »
Hi,  I'm wondering if I could get a little help figurein gout how to have my nano10 make a http post in order to publish data to a remote data logging software.

If it's possible I'm guessing it would be something like:

PRINT #4 "<TCPCONNECT 64.113.32.5:8080>"

but then I need to send something like Temp=DM[50] so it would send the data in dm[50]

Is this possible and could someone help me figure out the formate of this?

Thanks,
Joel.

5
Technical support / Re:Programmers
« on: March 06, 2011, 03:31:42 PM »
Hi, I don't know if you already got this done but if not I'm happy to help.

Joel.

6
General Discussions / New Webpage code for Nano 10 and F-Series
« on: June 28, 2010, 01:39:54 PM »
Hi,

I have created some customizable code for the web serves on the Nano 10 and F-Series PLCs.  This new code allows a user to define as many DM fields and Relays as they like and place them on a page.  I also have put together some more advanced code that allow a user to display relays as iphone slider buttons and a very powerful drop down menu for DM fields.  It also allow you to display decimal places in DM fields and attache a nice up down button.

I've made a video showing a demo of the code that can be viewed at: http://www.youtube.com/watch?v=Nmc2pM1i0KU

Please contact me with any questions of to purchase these files

Joel Haggar
Infinite Automation Systems
(303) 558-7112

Pages: [1]