Internet PLC Forum

General => Technical support => Topic started by: raan on May 25, 2003, 06:41:14 PM

Title: Can no longer set PLC's Time from TriLogi 5.12
Post by: raan on May 25, 2003, 06:41:14 PM

Anyone
I was running the Trilogi web server 2.0 and was able to set the time on a T100MD888 using both the trilogi application and java applet. Now I cannot set the time through either approach. Anyone have ideas as to what may be wrong? However I still can set the time with the DOS application. I tried re-installing the Trilogi app and server but to no avail.
raan

Title: Re: Can no longer set PLC's Time from TriLogi 5.12
Post by: support on May 28, 2003, 06:53:05 AM

1) Are you able to communicate with the serial port from within TLServer? Did you try the "IR*" command and what response did you get from the PLC?

2) Are you able to perform on-line monitoring, program transfer etc using Internet TRiLOGI?

Title: Re: Can no longer set PLC's Time from TriLogi 5.12
Post by: support on June 04, 2003, 01:08:56 PM

We just realised that a bug in the TRiLOGI 5.12 software gives problem when you try to set the PLC clock on Sunday because the PC's real time clock gave a number 0 which was not handled properly by the software.  This will be fixed in the upcoming upgrade to version 5.2 (not yet released, should be soon).

Title: Re: Can no longer set PLC's Time from TriLogi 5.12
Post by: support on June 23, 2003, 03:12:19 PM

We have released the TRiLOGI version 5.2. All licensed users can obtain free upgrade by following the "upgrade.htm" document in their CD ROM.