1
Technical support / Frequency/DI to Analog
« on: June 24, 2003, 12:43:20 PM »
I am new to PLC and have purchased a T100MD888+. I would like to convert a frequency which will reference speed and a digital input which will determine direction and have it scale an analog output. The frequency will be from 0 to 300hz while the digital input will be either a logic 1 (forward) or 0 for reverse. I would like to scale the output of the analog output so I may feed that into the analog input of a microcontroller which will handle the motor output based on the incoming analog input. The microcontroller itself will not handle the frequency and DI that is why I purchased the T100MD. Also, there is a left and right side to this circuit as it will be driving motors on the left and right side of a cart. So I will have frequencies for left and right and DIs for left and right. This will need to output 2 analog signal for left and right.
Thanks in advance for any help that is offered.
Clyde
Thanks in advance for any help that is offered.
Clyde