Internet PLC Forum

General => Technical support => Topic started by: william on January 04, 2008, 04:03:26 AM

Title: Small error in thermistor application note
Post by: william on January 04, 2008, 04:03:26 AM

I noticed a small error in your Thermistor application note. When the measured value is between -0.1 and -0.9 degrees F, the display shows it as positive. I only noticed because you have previously given me a simple solution to this precise problem.  

Title: Re:Small error in thermistor application note
Post by: support on January 04, 2008, 04:34:00 PM

Thank you for pointing out the error. Our engineer who wrote the app note had corrected the error and the updated application notes has been uploaded.