Internet PLC Forum
General => Technical support => Topic started by: tuong on December 28, 2003, 11:24:48 PM
-
Hi all
I'm Tran Cat Tuong from Vietnam,
Have anybody out there tried connecting T100MD+ PLCs with CitectSCADA via Modbus RTU / Modbus ASCII ?
Any information will be highly appreciated !
Thank you and best regards,
Tran Cat Tuong.
tuong@haison.com.vn
-
Hi Tran:
I test the unit with Citect using Omron protocol, and the test go very well.
Best Regards,
Melin
-
Hi Melin,
I'm very happy to hear about your achievement.
Could you show me the details ( the board, port ... forms ? )
Why don't you use Modbus as T100MD fully supports Modbus ?
Regards,
Tran Cat Tuong.
-
I tested with T100MD888+ because we have a network of omron PLC's with radiomodems and need stations with solar power (we are testing with T100MD888+ at 12VDC)
I'm using the Port of programming in Automode.
We test the modbus protocol when we finish the test with omron.
Bye,
Melin