Internet PLC Forum

General => Technical support => Topic started by: songkiat on March 12, 2010, 08:16:46 PM

Title: T44H-npn
Post by: songkiat on March 12, 2010, 08:16:46 PM

hi
Now I have your product.(T44H-npn and software trilogi version 3.2) but I don't have cable.I make cable rs-232 but not respond.


2  ---  3
3  ---  2
4  ---  4 and 6
5  ---  5
            7 with 8
            8 with 7

or

2  ---  3
3  ---  2
4  ---  6
5  ---  5
6  ---  4


Please .
1.How to make cable link.
2.trilogi v.3.2 can run on winxp ?(yes/no)
   

  Regards,
Songkiat

Title: Re:T44H-npn
Post by: support on March 13, 2010, 12:27:33 AM

Cable is straight-thru and require 4 pins:

2-2
3-3
4-4
5-5

TRiLOGI 3.2 is DOS version and would not run on Windows XP. You need a computer that runs DOS or Windows 98/Millenium.

If you can't find DOS computer then you may purchase the WinTRiLOGI 3.5 software that can run on the Windows XP or Vista and you can use it to program the T44H PLC.

Title: Re:T44H-npn
Post by: songkiat on March 13, 2010, 05:52:46 PM

thank you for feedback to me.
How much wintrilogi  3.5 ?

Title: Re:T44H-npn
Post by: support on March 13, 2010, 08:11:54 PM

Where did you buy the PLC? Please contact your distributor or email to sales@tri-plc.com if you have bought the original PLC from us.