Internet PLC Forum

General => Technical support => Topic started by: tuong on December 28, 2003, 11:24:48 PM

Title: Communication with CitectSCADA
Post by: tuong on December 28, 2003, 11:24:48 PM

Hi all

I'm Tran Cat Tuong from Vietnam,

Have anybody out there tried connecting T100MD+ PLCs with CitectSCADA via Modbus RTU / Modbus ASCII ?

Any information will be highly appreciated !

Thank you and best regards,
Tran Cat Tuong.
tuong@haison.com.vn

Title: Re: Communication with CitectSCADA
Post by: Melin on January 11, 2004, 09:38:33 PM

Hi Tran:

I test the unit with Citect using Omron protocol, and the test go very well.

Best Regards,
Melin

Title: Re: Communication with CitectSCADA
Post by: tuong on January 12, 2004, 02:18:01 PM

Hi Melin,

I'm very happy to hear about your achievement.

Could you show me the details ( the board, port ... forms ? )

Why don't you use Modbus as T100MD fully supports Modbus ?

Regards,
Tran Cat Tuong.

Title: Re: Communication with CitectSCADA
Post by: Melin on January 15, 2004, 11:47:04 PM

I tested with T100MD888+ because we have a network of omron PLC's with radiomodems and need stations with solar power (we are testing with T100MD888+ at 12VDC)

I'm using the Port of programming in Automode.

We test the modbus protocol when we finish the test with omron.

Bye,
Melin