Internet PLC Forum

General => Technical support => Topic started by: martin.degrave on April 25, 2013, 03:57:56 AM

Title: Encoder
Post by: martin.degrave on April 25, 2013, 03:57:56 AM

Hi,

I am using a HSC to read the value of a quadrature encoder.

I would like to reset the value HSC[1] when I set DM.

Can you help me?

Many thanks

Martin

Title: Re:Encoder
Post by: support on April 25, 2013, 05:08:57 PM

To clear the HSCPV[n]

HSCPV[n] = 0