Internet PLC Forum
General => General Discussions => Topic started by: Vincent Tan on May 20, 2003, 10:50:04 PM
-
Dear Sirs.,
I frist time to use T100MD2424, I have some prolem hope you can help me
1.) I using 4 BCD Digital Sw connected to Input 17 ~
24, set 4,3,2,1 then move to B or DM[1], but result
is B=17185 not is 4321 . how to convert to BCD
(4321)?
2.) How to save B=4321 to C=321 and D=4 ?
Thank you
regards
Vincent