Internet PLC Forum

General => Technical support => Topic started by: raan on March 31, 2010, 10:08:17 PM

Title: Nano 10
Post by: raan on March 31, 2010, 10:08:17 PM

Just got my Nano 10 today. I am communicating with it via a rj45 crossover cable through i-trilog 6.31 running on a laptop.  After I load the relay.pc6 program, I am unable to set the time from the pc. Also the columns on online monitoring show the correct headings of inputs, timers, counters, relays and outputs but the items below are unreadable.

Title: Re:Nano 10
Post by: support on April 01, 2010, 01:54:46 AM

What O/S are you using and what is the Java version?

Is your problem similar to the following thread?

http://www.tri-plc.com/yabbse/index.php?board=2;action=display;threadid=1459

A quick solution may be to remove the current JRE and install JRE 1.4.2

Title: Re:Nano 10
Post by: raan on April 01, 2010, 05:00:03 AM

I am running xp professional w/sp3 and  the java version you suggested. Display is now okay but the Clock it still a little of trouble but can finally set it correctly by restarting the 6.3 then resetting

Title: Re:Nano 10
Post by: support on April 01, 2010, 09:33:59 AM

Do you have to keep doing this every time you want to set the RTC? That's a bit strange. You should be able to set the RTC once you have login to the PLC. Are you able to do online monitoring uninterrupted?

Title: Re:Nano 10
Post by: raan on April 01, 2010, 12:54:51 PM

Everything is working correctly. now the only thing I failed to do when downgrading to 1.4.2 java was I failed to do a restart