Internet PLC Forum

I recently purchased an FMD88-10 plc and KEP HMI mT6070ie.  I also purchased the cable to connect them.  I am having trouble establishing communication between the PLC and the HMI.  I am using Com1 on the PLC which I set the baud and protocol in the first scan.  I have downloaded sample projects in the HMI but have not found a matching sample for the FMD plc that I could use as a starting point to establish communication and figure out the addressing.

If anyone has a sample project with the KEP HMI and FMD processor that could get me started it would be much appreciated.

I have tried the Free Protocol and the Modbus Server.  

Thanks,

Glenn