Show Posts
1
Technical support / Periodic alarms send
« on: November 08, 2010, 05:28:14 AM »
Hi,
I'm a very newbie in this PLC area.
I'm using a Nano-10 device for some basic functions : some on/off inputs and an analog temperature sensor. I want to be able to send some emails when one contact is opened or when the temperature is higher than a threshold. I managed to sole this problem using but I have a problem : how can I send same email at every 30 min for example? of course, I want to be able to set this timer and the mail need to be retransmit if only the sensor is still in alarm position.
I'm using a very simple config, as you may see in the attached picture.
I'm a very newbie in this PLC area.
I'm using a Nano-10 device for some basic functions : some on/off inputs and an analog temperature sensor. I want to be able to send some emails when one contact is opened or when the temperature is higher than a threshold. I managed to sole this problem using but I have a problem : how can I send same email at every 30 min for example? of course, I want to be able to set this timer and the mail need to be retransmit if only the sensor is still in alarm position.
I'm using a very simple config, as you may see in the attached picture.