Internet PLC Forum

General => Technical support => Topic started by: senojlr1 on June 10, 2013, 08:00:10 PM

Title: graphic lcd
Post by: senojlr1 on June 10, 2013, 08:00:10 PM

is there a way to use a graphic lcd with the FMD 88-10. I need a way to display an xy plot.  Any ideas?

Thanks
RJ

Title: Re:graphic lcd
Post by: support on June 10, 2013, 08:53:50 PM

You will need a graphical LCD that can be driven by serial commands. There are some suppliers out there such as Matrix Orbital which you can check out. You may need to interface their serial port to our RS232 or RS485 port.