Internet PLC Forum
General => Technical support => Topic started by: sengbeng on March 01, 2010, 04:57:38 AM
-
Hi,
Any way to set the RS485 baud rate to 11520 ?
regards
sengbeng
-
Which PLC are you using? If it is T100MD+ or T100MX+ then it does not support 115,200 bps baud rate. The maximum compatible baud rate with PC is 38,400bps.
However, on the F-series PLC you can use SETBAUD n,9 to set the COMM port #n to 115,200 bps.