Internet PLC Forum

General => Technical support => Topic started by: Lance on June 05, 2006, 04:55:53 PM

Title: Simulating RS232 Data In/Out
Post by: Lance on June 05, 2006, 04:55:53 PM

Is there a way in the simulation mode to handle RS232 data input?

If so, how is this done?  (Receive a Character in to the simulation)

Thank you,
Lance

Title: Re:Simulating RS232 Data In/Out
Post by: support on June 07, 2006, 01:27:01 PM

You can simulate the INPUT$ command but not the INCOMM command. The INPUT$ command will prompt you to enter a text string and when you press the Enter key it will be read into the PLC.